HBA Upgrade

HBA FCODE installation
cd /opt/EMLXemlxu/bin
bash-2.05# ./emlxadm

EMLXADM Device Management Utility, Version 1.00r
COPYRIGHT © 2004-2006 Emulex. All rights reserved.

Available HBA’s:

1. /devices/pci@3c,600000/SUNW,emlxs@1/fp@0,0:devctl (CONNECTED)
2. /devices/pci@3c,600000/SUNW,emlxs@1,1/fp@0,0:devctl (NOT CONNECTED)
3. /devices/pci@3d,600000/SUNW,emlxs@1/fp@0,0:devctl (CONNECTED)
4. /devices/pci@3d,600000/SUNW,emlxs@1,1/fp@0,0:devctl (NOT CONNECTED)

Enter an HBA number or zero to exit: 1

emlxadm> get_fcode_rev ———->Check the Fcode version before

FCODE revision: LP10000DC-S 1.50a8

emlxadm>

emlxadm> download_fcode /var/tmp/PWP/TO300a2.PRG

emlxadm> get_fcode_rev ——>After upgrage the Fcode of one HBA then see if the LUN is visible under the HBA (controller)
OR
# unzip 121773-04.zip
a) After file unzip, files included in this patch are as follows:
TL503A0.PRG

c) Go to the patch directory and run these commands
# cd 121773-04
# ./upgrade_boot.sh TL503A0.PRG

Upgrade HBA Firmware

bash-2.05# ./emlxadm

EMLXADM Device Management Utility, Version 1.00r
COPYRIGHT © 2004-2006 Emulex. All rights reserved.

Available HBA’s:

1. /devices/pci@3c,600000/SUNW,emlxs@1/fp@0,0:devctl (CONNECTED)
2. /devices/pci@3c,600000/SUNW,emlxs@1,1/fp@0,0:devctl (NOT CONNECTED)
3. /devices/pci@3d,600000/SUNW,emlxs@1/fp@0,0:devctl (CONNECTED)
4. /devices/pci@3d,600000/SUNW,emlxs@1,1/fp@0,0:devctl (NOT CONNECTED)

Enter an HBA number or zero to exit: 1

emlxadm> get_fw_rev

Firmware revision: LP10000DC-S 1.90a4

emlxadm>

emlxadm> download_fw /var/tmp/PWP/

emlxadm> get_fw_rev

#patchadd 119914-15
#showrev -p | grep 119914-15